16
Manual Mode
After pushing the MANUAL MODE key in the Main Menu screen, the following screen will appear:
iPad
1. To pause the unit during operation select the Pause key.
2. Push the OVERRIDE key to turn on all three pumps at the same time for full output of the system. This
function is not used with a moisture only unit.
3. To turn the pump on, select the colored box next to P1 and chang
e the ‘X’ to a check mark. Ensure all
pumps are off with a moisture only unit.
4. The moisture content is shown in the upper right hand corner.
5. Baling rate, stroke counts, and Application rate are shown in the middle of the screen. The Actual reading
will read zero with a moisture only unit.
6. Volume used and strokes per bale shown at the bottom of the screen will show accumulated pounds of
preservative used on the go. This number will reset at power down, but remains in the job record screen. .
# Used will read zero with moisture only unit.
7. This graph shows the moisture trend from the last 90 seconds of baling (one reading every 3 seconds).
8. The DCP button shown displays your connection signal with the Bluetooth receiver.
Green
– DCP is connected, Yellow – DCP is connecting, Red – DCP not connected.
9.
Pressing MAIN MENU will return you to the opening screen.
2
1
7
8
6
3
5
9
4
Summary of Contents for 600SS
Page 2: ...2 intentionally blank...
Page 30: ...30 NOTES...