manualshive.com logo in svg

Harvest Healthcare WOBURN COMMUNITY 1200, General User And Safety Manual

Share
Download
Harvest Healthcare WOBURN COMMUNITY 1200 General User And Safety Manual Download Page 6

T

 +44 (0)1709 377172     

F

 +44 (0)1709 377173

6

GENERAL INFORMATION

1 

GENERAL INFORMATION

Read through this instruction manual conscientiously from start to finish. 

Please observe the various safety instructions.

Clean and disinfect the care bed before first use

BEFORE USING THIS SYSTEM FOR THE FIRST TIME:

- 

- 

-

Harvest Healthcare care beds bear the CE mark and meet all safety and functionality 
requirements. This bed was tested according to the international standards which contain 
the safety requirements for medical products. These safety requirements can only be met 

however, if the user satisfies himself of the proper state of the care bed (including accessories) 

before using the bed.

Please observe the legislation in your country.

1.1 

EXPLANATION OF THE SYMBOLS USED

IPX4

Read information with this symbol carefully and follow instructions. This 
information is safety-relevant.

This symbol indicates hazards due to electrical voltage. There is mortal danger!

This symbol indicates general hazards. There is danger to life and health.

Conformity mark in accordance with the Medical Device Directive (93/42 EEC).

The electrical equipment is splash-proof. 

Symbol for Protection Class II device, double shock-proof

Symbol for type B device according to DIN EN 60601-1.

Summary of Contents for WOBURN COMMUNITY 1200

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands