manualshive.com logo in svg

Harvest Healthcare WOBURN COMMUNITY 1200, General User And Safety Manual

Share
Download
Harvest Healthcare WOBURN COMMUNITY 1200 General User And Safety Manual Download Page 29

E

 [email protected]      www.harvesthealthcare.co.uk

29

SERVICING

10 SERVICING

10.1 PRINCIPLES

Operators of care beds are obliged according to MPBetreibV (Operators of Medical Products
Ordinance) §4 to guarantee the safe condition of the medical product over their entire service 
life.

The test according to the regulation EN 62353 contains the following minimum requirements:

• Visual check
• Measurement of leakage resistance
• Measurement of leakage current
• Functional test
• Overall evaluation

The service life of the care bed depends essentially upon the handling and servicing.

To guarantee safe operation, a visual and functional test including an electrical test must be 
carried out at least once a year. For this purpose, proceed according to the technical safety 
checklist as per regulation EN 62353 in section 

10.2

If you have any doubts about the safety or functionality of the bed or 

even a part of the bed as a result of the work performed below, the 

bed should under no circumstances be put into service again.

Contact the supplier or manufacturer in this case.

Summary of Contents for WOBURN COMMUNITY 1200

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands