manualshive.com logo in svg

Harvest Healthcare WOBURN COMMUNITY 1200, General User And Safety Manual

Share
Download
Harvest Healthcare WOBURN COMMUNITY 1200 General User And Safety Manual Download Page 4

T

 +44 (0)1709 377172     

F

 +44 (0)1709 377173

4

CAUTIONS & 

WARNINGS

READ THIS INSTRUCTION MANUAL AND OBSERVE
SAFETY INSTRUCTIONS.

CAUTION

Please read and observe this instruction manual before each use. In the event that the care 
bed changes owners, please supply this instruction manual to the new owner.

When the bed is moved on the transport frame take care not to allow it to overbalance. The 
narrow, tall design saves storage space but may tip over if handled carelessly.

Please check all fixings on your bed at least once a month. Pay special attention to sleeping 

platform connections.

Before cleaning and disinfecting, the mains plug must be disconnected and hung up safely. 
Plugs for the handset and the motors which are inserted into the mattress base control box 
and the motor unit must remain plugged in. This is necessary to prevent water ingress to the 
control box.

Do not sit on the leg section of the bed when operating the raise function. 

Ensure that the recommended service and maintenance schedule in this manual is 
completed. Failure to do so could invalidate warranty claims. 

Summary of Contents for WOBURN COMMUNITY 1200

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands