Rev.: 2016-09-19
3 / 6
Owner’s Manual Crimping Tool HARTING Han-Fast® Lock
1. General Information
The HARTING-crimping tool is manufactured by using the latest technology and the generally accepted safety
regulations. The pliers may only be used in proper working condition with all safety and hazard regulations in
mind and should be used solely for the purpose, for which it is intended for in this owner’s manual.
Any unauthorized modification or improper use of the HARTING Crimping Tool
excludes the manufacturer from any liability from damages resulting from this. Only
work on disconnected cables and connectors!
Attention
2. Intended Use
Depending upon the type to crimp Han-Fast® Lock series straight and angled connectors:
Item No. of Crimping Tool
Contact Type
Cross Section in mm²
Locator
Length of Cable to be stripped
09 99 000 0881
straight
1,5 / 2,5
yes
7,5mm
09 99 000 0831
straight
4,0 / 6,0 / 10,0
09 99 000 0877
angled
1,5 / 2,5
no
09 99 000 0876
angled
4,0 / 6,0 / 10,0
3. Description
The HARTING Crimping Tool consists of one basic tool
1
with an adjustment plate
2
and an emergency
release lever
3
, a die set (depending on application)
4
, two fastening screws
5
for the die set and, optionally
a positioning aid/ locator
6
(for “straight” contacts).
The crimp force can be adjusted (see 7. Setting the Crimping Height). The HARTING Crimping Tool Crimpzange
has a ratcheting mechanism. Only after the last ratchet step is reached, the pliers will open automatically
(concept of forced completion). In order to avoid damages to the crimping die set or the connectors, the
pliers may be opened prematurely by engaging the emergency release lever (see also 6. Emergency Release
of Forced Lock).
1
3
2
5
4
6