E018-P
User Manual
FW_E018-P_M_v0301-01_EN
Page 61
APPENDIX D - REMOTE CONFIGURATION TOOL
D.1
INTRODUCTION
Besides the HART handheld configuration options (requires type CR), configuration of the E018-P
can be done through PC configuration software.
The free PC software can be downloaded and installed onto your computer system. The software
package allows you to set the configurations as desired, up- or download the settings to the MEM
and print a hardcopy for each product. With the software, programming of multiple products can be
done very easy.
D.2
CABLE CONNECTION
Before opening the enclosure, consult
Section 6.2.3: Opening, assembling and closing the unit [»34]
.
To connect the MEM to a PC, a cable suitable for the supplied type of communication (CR, CX)
should be used, as illustrated in the following image:
USB
CX: service connector
ACE02
Accessory:
CONFIG
Fig. 41:
Cable connection between MEM and PC.
When type CR is supplied, a cable suitable for type CX is required.