![background image](http://html1.mh-extra.com/html/harry-taylor/ht2000/ht2000_installation-service-and-user-manual_4014148007.webp)
7
1.5 Warranty
The heater is supplied with a 1 year parts
and labour warranty and a further year on all
parts excluding consumable’ s.
In addition to this there is also a 10 year
time related warranty on the combustion
chamber.
The warranty commences from the date of
dispatch from the manufacturer, and is
subject to the terms detailed within the Harry
Taylor Ltd. 'conditions of business'.
Note (i)
The warranty may be invalidated if -
a) The warranty registration/commissioning
card has not been completed and returned
to Harry Taylor Ltd.
b) The installation is not in accordance with
the general requirements of this manual.
c) The flue arrangement and air supply for
the heater are not in accordance with the
manufacturers recommendations, codes of
practice, or similar standards.
d) Air flow through the heater is not in
accordance with the manufacturers
technical specifications.
e) Internal wiring on the heater has been
tampered with or unauthorised service /
repairs undertaken.
f) The main electrical supply input to the
heater has been interrupted during the
heating mode.
g) The heater has been subject to and
affected by the ingress of water in any form.
h) The heater is not operated at the rating(s)
laid down in the manufacturers technical
specifications.
i) The heater has not been operated or used
within the normal scope of its intended
application.
j) The manufacturer's recommended
minimum service requirements have not
been complied with.
Note (ii)
All warranty claims must contain the
following information to enable processing to
take place;
(1) Heater model
(2) Heater serial number
(3) Order reference/date of order, together
with full installation details (name and
address)
(4) Details or symptoms of fault
(5) Installers name and address.
Faulty parts must be returned to the Harry
Taylor Ltd Spares Department, the address
of which is provided on the rear cover of this
manual. Any such parts will undergo
inspection to verify the claim. Replacement
parts supplied prior to this may be charged,
and a credit supplied upon subsequent
validation of the warranty claim.
Consumable items are specifically not
included within the scope of the warranty.
Note (iii)
Notification is required immediately a fault is
suspected.
The manufacturer will not accept
responsibility for any additional damage that
has been caused, expense incurred, or
consequential loss resulting from any failure
of the heater(s).
1.6 SPECIAL RISK AREAS
Where it is proposed to install a heater
within a special risk area (e.g. an area
containing flammable vapours where petrol
engined vehicles are stored parked or
serviced where paint spraying occurs, or
where woodworking machinery or other
flammable dust creating process’s are
employed then restrictions, additional
regulations concerning the heater flue wiring
or controls may apply.
It is strongly recommended that you contact
Harry Taylor Ltd Technical before
installation.
Caution
When used in room sealed mode it may be
possible to install PV heaters in areas
containing flammable vapours, high levels of
airborne dust combustible dust chlorinated
or halogenated hydrocarbons degreasing
solvents styrenes other laminating materials
Summary of Contents for HT2000
Page 51: ...51 Notes...