This product is protected by © Copyright
and Design Right Harrod UK Ltd 2003.
Please Note: For safety reasons, It is recommended that two or more people assemble this goal and it should take 1hour per goal.
Identify the product that you have purchased and refer to the correct pack contents.
No
Nut
Assembly Instructions
1
Crossbar and Uprights
- Lay the Crossbar and Uprights on the ground with the slots facing upwards and Slide 3 Square Head Bolts
into to the slots at both ends of the Crossbar, and 2 Square Head Bolts into the end of each Upright. Fit together using ‘L’Plate, washers
and bolts as shown in Fig 1.
Fig 1 Exploded
2
Assemble Sidebars
- Firstly, fit the Flip-Over Wheel supplied to the Side Bar, following separate instructions supplied with the wheel
position as shown in Fig 2. Fit other parts as shown and the other 2 Plates being hand tight only. Tighten one of the Nuts on the plate
with 4 holes so that the Plate doesn’t move.
21
23
14
20
17
1
2
Assembled Corner Detail
Whole Goal
660
Fig 2 Exploded
Assembled Sideframe
15
22
Pre-fitted
9
20
16
Hand
Tight
Fully tighten 1 only
21
23
Code:
Product:
FBL-635 and FBL-637
3G Aluminium Weighted Portagoal
