Harris ENC6800+, Installation And Operation Manual

Page: 36 / 80

22 ENC/ENS6800
+
Installation and Operation Manual
Chapter 3: Operation
Setting ENC/ENS6800
+
Control Parameters
The following table lists all of the available parameters and options for
the ENC/ENS6800
+
. All parameters clip unless otherwise indicated .
The On/Off combinations of the control LEDs on the card-edge indicate
the active bank number. See
“Changing Parameter Settings” on page 20
for more information.
Legend
Bold option=Indicates that this is the default setting for the parameter
[RO]=Indicates that parameters are read-only/feedback, and cannot be
used to select controls
All parameters clip unless otherwise noted.
Note
The sequence of options
listed in the
Options column
mirrors the sequence
achieved when you move the
Navigation Toggle switch
up.
Note
Bank 1 parameter options
are available for selection on
ENS6800
+
modules only.
Table 3-3. Card-Edge Parameter Options— ENC/ENS6800
+
Modules
Bank,
Rotary
Switch
Parameter Name Function Parameter Option
0, 0 Bank Select Selects a bank
• Bank 0
• Bank 1
• Bank 2
• Bank 3
(These parameters wrap)
0, 1 SDI Video Standard Selects the video standard input
• 625
• 525
• Auto
0, 2 For Future Use
0, 3 Black Level Adjusts the picture brightness ±7.5 IRE
(0 IRE)
0, 4 Luma Gain Adjust the luminous intensity of the
video signal ±3.0 dB
(0 dB)
0, 5 Chroma Gain Adjusts the picture color saturation ±3.0 dB
(0 dB)