Assembly Procedures
21. Set the notch of the hand wheel to the left hand side.
Insert the vertical link of the hand chain [43] into the
notch of the hand wheel [33] and reeve the hand chain
by
turning the hand wheel clockwise.
Wheel stopper
pin [35]
Pinion [14]
Hand wheel [33]
Notch
Split pin [36]
-
Hand chain
[43]
22. Put wheel cover [37] on the body A [10] and fix them with
the spring washers [39] and screws [38].
23. Put a hoist with Body B
[11]
side up. Place the slack
end of the load chain between body A [10] and body B
[11]. Then insert tail pin [40], and screw tap socket
bolt
[41]
into the body
B.
Tap socket bolt [41]
-~
Stripper [21]
Tail pin [40]
Body B [11]
Body A [10]
Load chain [42]
Hand wheel [33]
24
.
Remarks
-=
~
Make sure welds on hand
chain are to the outside of
the hand wheel.
~
~
Make sure the load chain is
not twisted.
Be carefu I not to cross
thread or over
torque tap
socket bolt [41 ].
~
