Assembly Procedures
12. Clean and grease ball bearing A [15] and 0 [17-A] and
insert into body A [10] (if being replaced).
13. Put the body A [10] with the ball bearings [15, 17-A] side
down on the body
B [11].
14. Insert four socket bolts [22, 22-A] into the body A [10]
and turn the whole body sideways. Then fix the bolts
with the U nuts [23] holding the U nuts with fingers.
Socket bolt [22-A]
Body B [11]
U nut [23]
15. Insert pawl pin [24] into the body A [10] and fix it with
the U nut [25].
16. Apply machine oil to the pawl pin [24] and join pawl
spring [26] and the pawl [27] respectively to it. Fix the
pawl with snap ring [28].
I'
22
.
Remarks
~
~
Make sure each part is
completely set between body
A [10] and frame [13].
~
Insert short socket bolts
[22-A] to the upper holes
and long socket bolts [22] to
the lower holes.
4i
~
Make sure the pawl spring is
fixed to the pawl and the
snap ring is securely set at
the groove of the pawl pin.
."
