heater is in operation and unattended.
5. Always unplug the heater when not in use.
6. Do not operate any heater with damaged cord or plug or after the heater has malfunctioned or has been
dropped or damaged in any manner.Return heater to an authorised service facility for repair.
7. Do not use outdoors.
8. This heater is not intended for use in bathrooms,laundry areas and similar indoor locations.Never locate
heaters where it may fall into a bath tub or other water container.
9. Do not run cord under carpeting.Do not cover cord with throw rugs,runners or the like.Arrange cord
away from traffic areas and where it will not be tripped over.
10. To disconnect heater,turn control to off,then remove plug from outlet.
11. Connect to properly grounded outlet only.
12. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an
electric shock or fire,or damage the heater.
13. To prevent a possible fire,do not block air intake or exhaust in any manner.
14. Do not use on soft surfaces,like a bed,where openings may become blocked.
15. A heater has hot and arcing or sparkings parts inside.Do not use it in areas where gasoline,paint or
flammable liquids are used or stored.
16. Use this heater only as described in manual.Any other use not recommended by the manufacturer may
cause fire,electric shock,or injury to persons.
17. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire.
18. Do not strike the heater glass.
19. Always use properly grounded,fused and polarized outlets.
20. Always disconnect power before perfoming any cleaning or maintenance,or relocation of the heater.
21. When transporting or storing the heater keep in a dry place,free from excessive vibration and store so as
to avoid damage.
22. The flame effect is powered by a motor and it is normal for the motor to make some noise as it slowly
rotates and helps to create the beautiful 3D flame effect.Some rooms have more or less furnishings than
others resulting in varying noise amplification.
23. Whilst every effort is made to ensure packing materials are kept outside of the plastic bag which covers
your heater in the box,there is a remote chance that some packing may lodge itself in the heater part of
the unit.If you notice this on close inspection,please remove it.When turning your heater on for the first
time it is normal for the heater to emit a little ‘new heater’ smell which quickly pass.
24. You may notice some light coming from under or from the sides of the unit.This is normal and the holes
allow the unit to ‘breathe’.Do not attempt to block these holes.
25. This heater is to be used on a 120 V, grounded circuit. Do not use in an outlet controlled by a switch or
dimmer switch.
Summary of Contents for BLT-999W-3
Page 6: ...PRODUCT DIMENSIONS...
Page 9: ......
