background image

2.

 

The heater may emit a slight,harmless odour when first used.This odour is normal 

and it is caused by the initial heating of internal heater parts and will not occur again.

3.

 

If the heater does not emit heat,consult your Pratical User’s Guide for further 

information. 

CAUTION 

RISK OF ELECTRIC SHOCK 

DO NOT OPEN 

NO USER-SERVICEABLE PARTS INSIDE 

HIGH TEMPERATURE 

KEEP ELECTRICAL CORDS,DRAPERY AND OTHER 

FURNISHINGS AT LEAST 1 METRE FROM FRONT OF THE HEATER AND KEEP THEM AWAY FROM 

THE SIDES OF HEATER

 

WARNING 

RISK OF FIRE-KEEP COMBUSTIBLE MATERIAL AWAY FROM FR TOP OF HEATER.SERVICING 

SHOULD BE DONE ONLY WHILE THE HEATER IS         

UNPLUGGED FROM POWER SUPPLY. 

 

 

The flame effect on the wall hanging fireplace is created by LED surface mounted components 
that are designed to last the life of the product.Do not remove back cover of heater,no user 
serviceable parts are contained within. 
 
 
 

 

IMPORTANT SAFETY INSTRUCTIONS

 

 

When using electrical appliances,to reduce the risk of fire,electric shock and injury to persons,basic precautions 

should always be followed,including the following: 

1.

 

Read all instructions before use. 

2.

 

This heater is hot when in use.To avoid burns,do not let bare skin touch hot surfaces.If provided use 

handle when moving this heater. 

3.

 

Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 

7cm away from the front of heater and keep them away from the sides of heater. 

4.

 

Extreme caution is necessary when any heater is used by or near children or invalids and whenever the 

Summary of Contents for BLT-999W-3













Reviews: