INSTALLATION INSTRUCTIONS SURFACE-MOUNTED SCREEN SC900 - SC910
03/15
|
13
Step 9
•
Place the thermal insulation blocks back in the box.
Step 10
•
Close the box with the cover, push it down and secure with the appropriate clips
(see Step 8).
Step 11
finishing profiles (optional)
•
Glue down the supplied finishing profiles. One on each side console (small profiles)
and one length at the top of the box (flush with the cover profile!).
Window anchors
In order to fix the box into the wall recess, the following window anchor types can be used:
for the SC900 a minimum length of
160 mm
is required.
− ALIPLAST ACVL 130 (160x38x2).
− REYNAERS window cl. Fulchs 439.119 (200x25x2) - available from Harol (optional).
Leave cover unobstructed! (SC900)
SC900
SC900
SC910
- First position the bottom (1) insulation profile and then the top one (2) (Fig. 10).
- Provide a cable wrap (loop) of approximately 20 cm in the chamber furthest
back (Fig. 9). In the event of subsequent maintenance or repair, the insert
module can be taken out of the box.
Fig. 9
1
2
SC900
Fig. 10
