INSTALLATION INSTRUCTIONS SURFACE-MOUNTED SCREEN SC900 - SC910
03/15
|
12
Step 8
•
Use the supplied screws to screw the bottom of the support plate to the base plate
(Fig 7).
•
Position the supplied clips into the base profile and clip until fastened (Fig. 8).
•
Now insert the supplied touchers for the bottom lath at approx. 100 mm from the sides
and clip to secure (Fig 9). For better accessibility lower the fabric.
•
Tighten the supports with the supplied
screws (Fig 7).
Fig. 8
Fig. 7
SC900
SC910
Fig. 7
Fig. 9
Always provide a loop for
securing the motor cable.
This loop determines the
available movement of the
insert module! (Fig. 8.)
STANDARD
cover for the box.
Ensure that the fabric is protected when
finishing the work!
OPTION
Complete support plate as cover for the box.
The fabric is fully protected by the
support plate
Fig. 8