39
just touching their thighs and is NoT across their
stomach.
6. Buckle the vehicle seat belt into place and ensure it is
secure by gently pulling on it.
!
BoTH SIdeS oF THe LAP BeLT MUST PASS UNder
BoTH ArMreSTS, ANd THe LoWer eNd oF THe
SHoULder BeLT MUST PASS UNder THe ArMreST
oN THe BUCKLe SIde.
!
Any straps holding the restraint to the vehicle should
be tight, any straps restraining the child should be
adjusted to the child’s body, and all straps should not
be twisted.
!
NeVer USe A VeHICLe LAP-oNLY BeLT WHeN USING
THIS BooSTer SeAT.
! WArNING
: To avoid possible entanglement hazard,
see “Entanglement with vehicle seat belt”.
iNstALLAtioN - Booster witHout BAckrest
See “Assembling/disassembling child restraint” for
instructions for removing the backrest.
1.
Place the booster seat flush against a forward-facing
vehicle seat. The vehicle seat
MUST
be equipped with
a 3-point lap-and-shoulder belt. Booster must be
level, stable and not rock side-to-side (see “Vehicle
seating positions”).
2. Place child on
the booster seat with child’s back flat
against the vehicle seat.
3.
Thread both sides of the lap belt
under BoTH armrests. Thread
the lower end of the
shoulder belt under
the armrest on the
buckle
side
❶
.
eNSUre that the belt is
snug across the child’s
hips. It is important to ensure that any lap strap is
❷
❶
