5. Should you need to loosen the UAS,
push the UAS release button ❺.
! WArNING
:
NeVer
put two UAS
connectors on one vehicle UAS
anchor unless specifically allowed
by the manufacturer ❻.
6. Secure the top of the child
restraint using the top tether
strap (see “Using Top Tether”).
!
Conduct a safety check for a secure
installation (see “Installation safety
check”). Perform this test every
time you drive with your child and
whenever you readjust the child
restraint as your child grows.
27
iNstALLiNG witH 3-PoiNt LAP-ANd-
SHoULder VeHICLe SeAT BeLT SYSTeM
❺
❻
If a UAS installation is not an option,
then use the following belt-only
installation method.
! WArNING
: UAS must be stored
when using the vehicle belt. Clip
both UAS hooks to the fabric loops
on each side of the backrest ❶.
1. Place the child restraint
flush against the back of
a forward-facing vehicle
seat.
2. Thread the vehicle
seat belt through the
belt slot opening and
out the other side. See
illustrations for proper
routing path of Lap-and-
Shoulder Belt ❷.
❶
❷
