Rack mounting instructions
Installing the MediaStore 7200 in the rack
Install the MediaStore chassis into the rack.
IMPORTANT:
Harmonic recommends that a minimum of three people lift the MediaStore
7200 when performing this procedure.
Before you begin
Confirm that the inner and outer rails are properly installed.
1. Fully extend the middle rails, making sure that the ball bearing shuttle is locked at the front of each
middle rail.
2. With two people holding the chassis level and a third guiding the chassis, line up the inner (chassis)
rails with the front of the middle (rack) rails so that the chassis is square with the rack rails.
3. Slide the chassis rails into the rack rails, applying pressure evenly on both sides until it clicks into the
fully extended position.
4. Simultaneously depress the locking tabs on both sides of the chassis, and then push the chassis all
the way into the rack.
5. Secure the chassis handles to the front of the rack with two screws.
Result:
31
Spectrum System 8.4 Installation Guide
