Spectrum
12
2. Click the icon for the component you wish to wink.
The
Properties
page appears.
3. From the
General Information
section of the page, view the
Wink State
.
• If currently
Off
, click
Wink On
.
• If currently
On
, click
Wink Off
.
Removing a module from the chassis
Remove the module from the chassis using a cross-head screwdriver.
1. Disconnect any cables from the module.
2. Using a screwdriver, loosen the two screws on the rear panel of the module as shown.
The screws are captive and will not come out completely.
3. Using both hands to grip the screws, gently pull out the module from the chassis, as shown in the
following figure.
2
3
Deleting an I/O module from SystemManager
Once you have removed the module from the chassis, delete the corresponding I/O module from
SystemManager.
1. Click the
Diagnostics
tab to display the
Diagnostics
page.
2. From the
Device Maintenance
section in the left-hand column, click the
Remove Device
icon to
display the
Remove Device
page.
3. Scroll to the
I/O Modules
section of the page and locate the module you wish to remove.
4. From the
Select
column, check the box for the I/O module you wish to remove, and then click
Remove
.
A confirmation message appears.
5. Click
OK
.
