Chapter 3 Electra 9200 Encoding Tutorial
© 2013 Harmonic Inc. All rights reserved.
17
Electra 9200 Release 01, Rev A
Configuring an Encoder with SDI Input and IP or ASI Output
Configuring the Audio
1.
Configure the Audio encoding properties. Right-click the audio stream and select Properties.
This page includes multiple panels with settings you can make for the audio stream.
Depending on your selections, panels are added or removed. For this document, we will only
look at the main panel. The values are set by default. To process the incoming audio, you
might need to change some of these settings.
The most important settings to consider are in the Encoding section. Since this stream will be
passed through to the output, we will only configure the Bit Rate. To instruct the encoder to
automatically create audio descriptors for this stream, select the check box. Harmonic also
recommends that you provide descriptive names for your streams and programs.
For specific information about the audio configuration fields, see the online help for this
configuration page.
2.
When you have made all your stream configuration settings, click
Apply
.
