SAFETY GUIDE
2
SAFETY NOTE
ITEMS YOU SHOULD NOTE WHEN USING THE MOTOR
NOTICES ON DESIGN
Always use them under the followings conditions:
The motor is designed to be used indoors. Observe the following conditions:
・
Ambient temperature: 10 to 30
℃
・
Ambient humidity: 20 to 80%RH (No condensation)
・
Under the environment with no vibration or physical shock
・
No contamination by water, oil
・
No corrosive or explosive gas
Follow exactly the instructions in the relating manuals to
install the motor in the equipment.
・
Ensure exact alignment of the motor shaft center and corresponding center
as per the manual.
・
Failure to observe this caution may lead to vibration, resulting in damage of
output shafts.
OPERATIONAL PRECAUTIONS
Never connect cables directly to a power supply socket.
・
Each motor must be operated with a proper driver.
・
Do not directly apply a commercial power supply. Failure to observe this
caution may lead to fire or damage to the motor.
Do not apply impacts and shocks.
・
Because the motor is directly connected to the encoder with high accuracy,
do not apply any impact on it.
・
Failure to observe this caution could damage the encoder and may cause
uncontrollable operation.
Avoid handling of motor by cables.
・
Rough handling of cables may damage connectors, leading to uncontrolled
operation of the motor.
Keep limited torques of the motor.
・
Keep limited torques of the motor.
・
When installing a load on the output shaft, keep the weight well balanced.
CAUTION