Chapter 6
Operating the display panel
- -
42
●
JOG operation patterns
JOG operates in an environment that has been set up by the following parameters:
[19: JOG operation speed]
[20: JOG feed pulse count]
[40: JOG acceleration/deceleration time constant]
[43: JOG character-S selection]
For details, refer to “Chapter 7-2, Parameter details
Step feed area:
When the “UP” or “DOWN” key is pressed, the forward or reverse step takes place
for the pulse count that has been set for [20: JOG feed pulse count] of
[Parameter setup mode].
Consecutive feed actuator:
When the “UP” or “DOWN” key is pressed and held down, the
operation in the step feed takes places; the consecutive feed actuator is then
entered, and the rotation continues at the speed that has been set for [19: JOG
speed] of [Parameter setup mode]. Releasing the “UP” or “DOWN” key causes
the actuator to decelerate and stop.
JOG operation speed
S-ON
[r/min]
3000
JOG feed pulse count
JOG acceleration/deceleration time constant
UP or DOWN key
Consecutive feed area
Step feed area