36
1019659 11/2014
Correct assembly of component sets may be checked in one of four ways:
• By visual observation, if the tooth mesh is exposed.
• In case the gearing is not visible, the input shaft can be rotated by hand. Uneven rotation suggests dedoidal tooth mesh.
• If the Wave Generator is connected to a motor, an unusually high motor current indicates dedoidal tooth mesh.
•
A dial gauge can be inserted through an access hole near the Circular Spline to touch the surface of the Flexspline.
A quasi sinusoidal deflection during one revolution of the Flexspline indicates correct assembly as shown in illustration
36.1 function.
Illustration 36.1
Right
Flexspline deflection
concentric
1 Revolution (Input)
Wrong
Flexspline deflection
dedoidal
