866-351-2776 | www.Harmar.com |
| Pinnacle HD Stair Lift Manual
3
P/N: 75403 RevB 72618
Table of Contents
Table of Contents
I. PRELIMINARY CHECKS
TOOLS REQUIRED
The following is a suggested list of basic tools to have on hand during installation.
Cordless
drill
Allen wrench (5/64
"
, 5/32
"
, 3/16
"
, 5/16
"
)
Nut driver (3/8
"
and 5/16
"
)
6-10
"
driver extension
T30 Torx bit (included)
Level
Hack saw or chop saw
SAE socket set
SAE wrenches
Tape measure
INCLUDED PARTS
Before beginning installation, inspect and check the box contents. Report any damage to your dealer.
Chassis
Box:
Rail
Box:
•
Chassis
•
Bottom rail pre-installed with:
•
Call/send parts
• Bottom end plate
• 2 Call/send hand controls
• Charge strip wire harness
•
Battery charger
• Bottom limit cam
•
Installation Manual
• Joint pins and joint brackets
•
Owner’s Manual
(two-piece rail only)
• Plastic gear rack
• Top rail pre-installed with:
• Charge strip wire harness
Rail Bracket Box:
• Rail accessories (plastic bag):
•
Rail brackets (2, 3, 4, or 6 per set)
• Top end plate
•
Wood screws (#14 X 2
"
(4 per rail bracket)
• Compression bolts (3 sizes)
• Self-cutting screws (1/4
"
-20 X 1
"
)
Chair Box:
• Torx T30 driver bit
• Chair
• Rail parts (plastic bag):
• Back Rest
• Extra plastic racks (2 or 3)
• Seat Belt
• Top limit cam
Footrest Box:
• Footrest complete with:
• Swivel Slide Rails
• Swivel Pin bracket
•
Rear Seat Support
Preliminary Checks