16 |
P a g e
Final Inspection
□
Attachment to home is solid and adequately fastened.
□
All hardware is installed and tightened appropriately. It is recommended to
walk the length of the ramp (both sides) and snug all bolts with a
ratchet/socket combo.
□
All legs are properly supported and that the lower transition plate sits flush
with the terrain.
□
All ramp sections are leveled and pitched to the appropriate slope. From
the bottom looking up, you can view the pitch of the ramp by siting the
upper handrail with your eyes.
□
All handrail joints are smooth and there are no sharp edges. It may be
necessary to file down any rough spots. Run your hands along the full
length of the handrail on both sides of the ramp.
□
Railings have end caps installed where applicable and all ramp legs are
capped.
□
Job site is cleaned and there are no metal or metal shavings left on the
customers property.
Before the customer uses the ramp, it is critical that the
installer(s) perform a final inspection of the ramp system.
04OCT19 | 630-00103-01 Rev B