![background image](http://html1.mh-extra.com/html/harmar-mobility/highlander-rpl400/highlander-rpl400_owners-manual_600675005.webp)
Highlander Manual |
| www.harmar.com | (800) 833-0478
5
SPECIFICATIONS
Lifting Height:
RPL400 53”
RPL600 77”
Rated Load:
600 lbs.
Drive:
Belt driven Acme screw / 90 VDC ½ hp motor. Optional 24 VDC battery powered unit
Power Supply:
115 VAC – 15a. grounded circuit / 220 VAC (optional)
Control Circuit:
24 VAC (Low Voltage Controls)
Standard Platform:
36” x 48” (91 cm x 122 cm) with 36” (91 cm) high guard panels & automatic folding ramp
Footprint:
50” x 70” (127 cm x 177.8 cm)
Speed:
10 fpm (3 mpm)
Safety Design:
ASME A18.1, Section 5 - Private Residence Vertical Platform Lifts
Standards:
ETL Listed 3148125
CSA B44.1 / ASME A17.5 - Elevator & Escalator Equipment
Controls:
Rocker switch with emergency stop (key switch optional)
Manual Lowering:
Provided
Safety Features:
Safety pan, final limit, Acme safety nut with monitor, and non-skid surface
Warranty:
1-Year parts
CODE AND SITE REQUIREMENTS
Code Requirements
This platform lift is designed to meet ASME A18.1 section 5 and CSA B44/ASME A17.5 with
the addition of certain options. Code requirements for vertical platform lifts vary depending
on location. Your installer is responsible for contacting your local code enforcement office
to determine all applicable regulations prior to installing vertical platform lifts.
Site Requirements
The lift requires a 115VAC 20 amp grounded circuit. Outdoor installations require a GFI
protected circuit. Lift must be installed on a 4” thick, level 3,500 psi reinforced concrete
slab. The footprint requires 49”x 69” area (this includes the folding access ramp.)
Summary of Contents for Highlander RPL400
Page 9: ...NOTES ...
Page 10: ...NOTES ...
Page 11: ...NOTES ...
Page 12: ...P N 610 00017 Rev B Highlander Residential Platform Lift Owner s Manual ...