background image

HIGHLANDER RPL 

– ONE YEAR WARRANTY CERTIFICATE

LIMITED WARRANTY CERTIFICATE
Products Covered:  RPL400, RPL600 

Harmar warrants to the original purchaser of a Highlander Residential Vertical Platform Lift (RPL) manufactured by us to be free from 

defects in material, mechanical and electrical components (parts) for a period of one (1) year, provided that the products have been 

installed, maintained and operated properly by an Authorized Harmar Distributor or certified Harmar Installer.   

EXCEPTIONS TO THIS LIMITED WARRANTY ARE: PLEASE READ CAREFULLY

• 

Harmar RPL’s installed outdoors must include the  
Premium Protection Package to maintain 1-year warranty;  
otherwise warranty is limited to six months.

• 

Batteries are limited to one (1) year with a Harmar  
supplied/approved charger.

• 

Damage resulting from improper installation or operation

• 

Negligence, alterations, abuse or misuse of the equipment 

• 

Fire, flood, acts of God 

• 

Shipping damage

This warranty starts on the date of initial product installation (not to exceed 90 days from the date of manufacture), provided the warranty certificate 
is completely filled out and returned to Harmar within ten (10) days of installation. 

 Harmar and its dealers shall not be liable for any consequential, 

special or incidental damages arising out of the purchase or use of the unit or resulting from the breach of this Limited Warranty, or any implied warranty. 
The limit of liability of Harmar and its dealer hereunder shall be the unit’s purchase price. Some states do not allow limitations on how long an implied 
warranty lasts or the exclusion or limitation of incidental or consequential damages, or legal remedies, so these above limitations may not apply to you. 
All warranty claims must be reported to the dealer from whom the lift was purchased as they have responsibility for handling your warranty claim. The 
dealer is to contact the Technical Services Department of Harmar and provide the serial number of the product along with a description and evidence of 
the defect(s) supporting a warranty claim. Dealers may charge for labor, service, travel, or other associated costs to make repairs, and such charges are 
not covered by this Limited Warranty. It is permissible to have any repairs or replacement work done as a result of any defects in material and workman-
ship by someone other than the Dealer under this Limited Warranty. However, the Limited Warranty does not cover any charges or expenses assessed by 
any such other person or company performing such repairs or replacement work. All parts used to replace defective materials must be genuine Harmar 
parts to be covered by this Limited Warranty. This Limited Warranty gives you specific legal rights, and you may have other rights which vary from state 
to state. Harmar will not be charged for labor, consequential damage or repair expenses. Harmar will not, under any circumstances, be liable for the loss 
of the use of its products or loss of time. Defective parts must be returned, if requested, prepaid, to Harmar for inspection prior to credit or replace-
ment. At Harmar’s discretion, any part found to have been modified, over-stressed, damaged by accident, or misused is not covered by this warranty. 

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, INCLUDING ALL IMPLIED WARRANTIES OR MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE, AND THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION OF THE LIMITED 
WARRANTY DESCRIBED HEREIN. 

• 

Parts used that are not approved by Harmar Mobility, LLC. 

• 

Labor fees for installation work, repair or service calls are not covered

• 

Outdoor installation within 1 mile of a coastline reduces warranty 
to 90 days and expressly excludes rust after 30 days.  Warranty is 
extended to 1 year with Premium Protection Package Option. 

• 

Due to the nature of steel construction being permanently placed in 
an outdoor environment and its inherent unpredictability, minor paint 
defects and cosmetic rust are not covered after 30 days
 by Harmar’s 
Limited Warranty.

Warranty

Effective 

August 

1, 

2017 

          

Summary of Contents for HIGHLANDER EPL400

































Reviews: