AL625 & AL625HD
Page 2
REV: 1-24-12
TABLE OF CONTENT
SECTION TITLE
PAGE #
REQUIREMENTS AND CONSIDERATIONS BEFORE INSTALLATION
……………………………………3
SAFETY FIRST
…………………………………………………………………………………………………….4
TOOLS AND SUPPLIES REQUIRED FOR INSTALLATION ……………………………………………………. 4
STEP 1
ELECTRICAL WIRING
5
STEP 2
INSTALLING THE MOUNTING BARS
6
MOUNTING THE TRACKER DIRECTLY TO THE VEHICLE’S FLOOR
7
STEP 3
POSITION THE TROLLEY ASSEMBLY ON THE MOUNTING BARS
8
STEP 4
ATTACH LEVELING FEET TO THE TROLLEY ASSEMBLY
9
STEP 5
POSITION THE TROLLEY ASSEMBLY AND BOLT IT DOWN
10
STEP 6
RAISE THE BOOM AND INSTALL THE BOLT
11&12
STEP 7
MOUNTING THE PLATFORM ASSEMBLY TO THE TROLLEY ASSEMBLY
13
STEP 8
CHECK CLEARANCES WITHOUT LOAD
14
STEP 9
ADJUST PLATFORM ANGLE TO SUIT LOAD
(if necessary)
15
STEP 10
ADJUSTING THE VERTICAL – HORIZONTAL TRANSITION (if necessary)
16
STEP 11
CONFIRMING HOME POSITION AND LOCKING PIN ALIGNMENT
17
STEP 12
INSTALLING THE STRAP SYSTEM
18-19
FUSE FOR RF REMOTE CONTROL CIRCUIT ………………………..………………………………………… 20
TRAINING THE END-USER ……………………………………………………………………………………… 20
MAINTAINING THE LIFT ……………………………………………………………………………………….. 20
TROUBLESHOOTING ……………………………………………………………………………………………. 21
ELECTRONIC CONTROL BOX WIRING DIAGRAM ...…………………………..……………………………. 22
FOR YOUR RECORDS
SALESPERSON______________________________________
TELEPHONE________________________________________
PURCHASE DATE_________________________________LIFT SERIAL #______________________________________
CUSTOMER #_____________________________________ORDER #___________________________________________
