35
Save These Instructions
3-90-775R36_09/15
2. Combustion Blower
Requires no lubrication.
Keep the motor windings free of dust. Can be wiped clean
or vacuumed.
To remove combustion blower:
• Slide the insert body out of the mounting frame.
•
Locate the combustion blower motor in the back right
corner.
• Loosen 3 wing screws and turn the blower and mounting
plate 1/4 turn.
• Lower the motor and paddle fan out of the blower
housing.
3. ESP- (Exhaust Sensing Probe)
Remove and wipe clean with a soft cloth and glass cleaner
or alcohol.
To remove the probe:
• Slide the insert body out of the mounting frame.
•
The probe is installed on the side of the exhaust
chamber.
•
With a 1/4" socket or driver, remove the screw that
attaches the probe.
• Pull the probe out of it's mounting hole.
1. Feed Motor
Requires no lubrication.
Keep the motor windings free of dust. Can be wiped clean
or vacuumed.
To remove feed motor:
• Slide the insert body out of the mounting frame.
• Between the feed motor and the feeder body, you'll see
the cam block with a bearing that actuates the pusher
arm.
•
With a 7/16" wrench, loosen the hex-head bolt in the
end of the cam.
•
With the bolt loosened, the feed motor and its mounting
bracket will pull straight out of the auger shaft.
Loosen bolt in
end of cam block
ESP
Location
