20
Martin
®
ERA 700 Performance IP User Manual Rev. C
2.
To return to the previous level of the menu structure, press MENU.
Fixture type readout
To view the
fixture’s type:
1.
Select INFORMATION
→
FIXTURE TYPE and press ENTER.
2.
To return to the previous level of the menu structure, press MENU.
DMX Live
You can view the DMX values currently being received on each of the fixture’s DMX channels. This can
be useful for troubleshooting purposes.
To view the DMX values being received:
1.
Select DMX LIVE and use the UP and DOWN buttons to scroll through the value being received on
each channel.
2.
To return to the previous level of the menu structure, press MENU.
Resetting the fixture
You can reset the entire fixture to return it to its state when you powered it on, or you can reset its
effects only.
•
To carry out a full reset, select MANUAL CONTROL
→
RESET
→
ALL, select YES or NO and
press ENTER. The entire fixture will reset as if you had cycled power. The full reset process will
take several seconds.
•
To reset pan and tilt functionality only, you must first be prepared for the head to move through its
full pan and tilt ranges. Select MANUAL CONTROL
→
RESET
→
PAN/TILT and press ENTER.
The fixture will carry out a pan and tilt movement reset. The process will take several seconds.
•
To reset only the fixture’s effects, select MANUAL CONTROL
→
RESET
→
EFFECTS and press
ENTER. All of t
he fixture’s effects will reset. The effects reset process will take several seconds.
Manual control
You can control all
the fixture’s effects including pan and tilt manually without the need for a DMX
signal.
To manually control the fixture:
1.
Select MANUAL CONTROL and then use the UP and DOWN buttons to scroll to the effect that you
want to control. Press ENTER.
2.
Use the UP and DOWN buttons to scroll to the DMX value from 000 to 255 that you want to send
to that effect. Press ENTER to confirm and send that value.
3.
To return to the list of effects, press MENU.
4.
If you want to manually control other effects together with the first effect, repeat steps 1. and 2. and
3. above for the other effects.
The fixture will continue to show the effects that you have set manually until you set new manual
control values for the effects.
Exiting the MANUAL CONTROL menu by pressing the MENU button stops all the effects
immediately.
The effects are unaffected by a power OFF/ON cycle: if you power the fixture off and on again, it
will resume showing the effects.
When in manual control mode, pressing any button on the control panel lights up the control panel
display and shows the message MANUAL CONTROL MODE.