Harman Martin Atomic 3000 LED, User Manual

Page: 8 / 44

8 Atomic 3000 LED user manual
Introduction
Thank you for selecting the Atomic 3000 LED™, an intelligent lighting fixture from Martin Professional™.
This powerful LED-based stroboscopic effect light builds on the industry-standard Martin Atomic 3000
DMX™ strobe effect, and features:
• A ‘Beam’ LED array that gives powerful strobe and blinder effects
• An ‘Aura’ LED array that lights up the front surface of the fixture and has RGB color mixing
• Pre-programmed FX that can be synchronized, with or without offsets, in multiple fixtures
• Onboard control panel and backlit LCD display
• DMX control and RDM fixture management
• Atomic Colors color scroller unit (optional accessory)
For the latest firmware updates, documentation, and other information about this and all Martin Professional
products, please visit the Martin website at http://www.martin.com
Comments or suggestions regarding this document may be e-mailed to service@martin.dk or posted to:
User Documentation, Martin Professional ApS, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.
Using for the first time
Warning! Read “Safety Information” on page 3 before installing, powering, operating or servicing
the Atomic 3000 LED.
Important! The Atomic 3000 LED is a rugged fixture but it must be protected from environmental
factors such as excessive physical shocks and vibration during transportation and storage.
Before applying power to the fixture:
• Check the Martin Professional website at www.martin.com for the most recent user documentation and
technical information about the Atomic 3000 LED. Martin user manual revisions are identified by the
revision letter at the bottom of page 2.
• Carefully review “Safety Information” starting on page 3.
• Check that the local AC mains power source is within the fixture’s power voltage and frequency ranges.
• Check that the power input cable meets the requirements listed under “Protection from electric shock” on
page 3.
• See “Power cables and power plug” on page 9. If drawing power from a mains power outlet, install a
suitable power plug on the power input cable.