page 15
DriveCore Install DA Series Operation Manual
Setup and System Configuration
Setup and System Configuration
Amplifier Mode Settings
Figure 15:
Configuration panel (4-channel amp model shown)
(above) shows the Configuration panel for a 4-channel DriveCore Install DA amplifier. The 8-channel amplifier Configuration panels have the same feature
set. The DriveCore Install DA amplifier includes Digital Signal Processing (DSP), multiple input/output routing options, and a comprehensive diagnostics feature set. All of
these features can be adjusted from the Configuration panel.
The DriveCore Install DA amplifiers are very capable and flexible amplifiers. In the Amplifier Mode Setting window (see
), the following items can be adjusted.
• Hi-Z/Low-Z on an individual channel basis.
• 70Vrms or 100Vrms operation
• Any analog input can be sent to any amplifier output
• Mono Bridge Output - Output pairs can be bridged for mono operation
Hi-Z/Low-Z
The DriveCore Install DA amplifiers are capable of High Z and Low Z outputs. Each individual channel is capable of Hi-Z or Low-Z operation. To select Hi-Z or Low-Z
operation, double click on the mode button, the Amplifier Mode Setting Window will open (see
Global
Channel
Specific
Figure 16:
Low Z/High Z configuration
NOTE:
Choosing 70Vrms or 100Vrms is an amplifier global setting, and affects all output channels selected for High-Z operation.
Summary of Contents for crown DriveCore Install DA Series
Page 59: ......
