Using the NetLinx Module
77
Metreau Keypads Instruction Manual
Using the NetLinx Module
Overview
The Tango system can be controlled via the Touch Pages provided with the NetLinx Module, as described in this section. Refer to the
NetLinx module documentation for details on incorporating the module into your source code and loading it onto the NetLinx
Master.
Main Page (Initial View)
The initial view of the touch panel pages is the Main Page, featuring the Menu Bar along the left edge, as shown in FIG. 83.
Press the Menu Bar to access the two primary menu options (
Main
and
Setup
), as shown in FIG. 84:
FIG. 83
Main Page (Initial View)
FIG. 84
Main Page - Menu Bar options
Touch the Menu Bar to access the
main menu options (Main and Setup)
Touch to access the Location/Device pages
Touch to access the Setup pages
Touch to close the Menu Bar options
