Instruction Manual | 18
CE-IRS4
The CE-IRS4 has 4 individually configurable outputs.
First, select the output you want to configure. The labels
IR/S-1
,
IR/S-2
,
IR/S-3
, and
IR/S-4
act as radio buttons allowing
you to select one particular IR/Serial port to configure. In the above example, IR/S-1 is selected.
Next select the desired mode using the pulldown labelled
IR/Serial-
n
Mode
The modes are:
IR
,
Serial
, and
Data
•
The
IR
mode expects to drive an IR emitter (CC-NIRC). This emitter should be placed on the IR receptive area of
the controlled device.
•
The
Serial
mode expect to be wired directly to a controlled device, but still uses the IR waveform as control
•
The
Data
mode works as a 1-way RS-232 port. The effective distance and available baud rates are reduced from
a dedicated RS-232 port.