Remote Control Functions
o
Info Button:
This button does
not function with the AVR35RDS, but
it may be used when the remote is
used to control other products.
p
Clear Button:
This button does
not function with the AVR35RDS, but
it is available for use with other
devices.
q
Memory Button:
Press this
button to enter a radio station into the
AVR35RDS’s preset memory. After
pressing the button the
MEMORY
indicator
N
will flash, and you then
have five seconds to enter a present
memory location using the
Numeric
Keys
n
. (See page 26 for more
information.)
r
Tuner Mode:
Press this button
when the tuner is in use to select
between automatic tuning and
manual tuning. When the button is
pressed so that the
AUTO
indicator
O
goes out, pressing the
Tuning
buttons
v
will move the frequency
up or down in single-step incre-
ments. When the FM band is in
use, pressing this button when a
station’s signal is weak will change
to monaural reception, as indicated
by the
MONO
indicator
Q
. (See page
26 for more information.)
s
Direct :
Press this button to
select a radio station by entering
its frequency using the
Numeric
Keys
n
. (See page 26 for more
information.) This button is also used
as part of the process of erasing
command functions that have been
programmed into the remote. (See
page 31 for more information.)
t
Enter:
This button does not
function with the AVR35RDS, but it is
available for use with other devices.
u
Preset Up/Down:
When the
tuner is in use, these buttons scroll
through the stations that have been
programmed into the AVR35RDS’s
memory. When many source devices,
such as CD players, VCRs and cas-
sette decks, are selected using the
Device Control Selectors
c
, these
buttons will normally function as
chapter step or track advance.
v
Tuning Up/Down:
When the
tuner is in use, these buttons will
tune up or down through the selected
frequency band. If the
Tuner Mode
button
r
has been pressed so that
the
AUTO
indicator
O
is illuminated,
pressing these buttons will cause the
tuner to seek the next station with
acceptable signal strength for quality
reception. When the
AUTO
indicator
O
is NOT illuminated, pressing these
buttons will tune stations in single-
step increments. (See page 26 for
more information.)
w
Transport Controls:
These con-
trols do not control any functions of
the AVR35RDS, but they are used
extensively when operating a wide
variety of CD players, cassette
decks and VCRs. (See page 28 for
information on programming the
remote to utilize these buttons.)
x
Delay/Prev Ch.:
Press this
button to begin the process for
setting the delay times used by
the AVR35RDS when processing
surround sound. After pressing this
button the delay times are entered
by pressing the
Set
button
j
, and
then using the
⁄
/
¤
buttons
h
to
change the setting. Press the Set
button again to complete the
process. (See page 20 for more
information.)
y
›
/Digital Button:
This button is
used to select the type of digital input
used with any one of the input sources
connected to the AVR35RDS. After
pressing this button, use the
⁄
/
¤
buttons
h
to make your selection
between
OPTICAL
E
or
COAXIAL
G
digital. Press the
Set
button
j
to
enter your choice. (See page 24 for
more information.)
z
Speaker Configuration:
Press
this button to begin the process of
configuring the AVR35RDS’s Bass
Management System for use with
the type of speakers used in your
system. Once the button has been
pressed, use the
⁄
/
¤
buttons
h
to
select the channel you wish to set up.
Press the
Set
button
j
, and then
select another channel to configure.
When all adjustments have been
completed, press the Set button
twice to exit the settings and return
to normal operation. (See page 17
for more information.)
`
Mute:
Press this button to
momentarily silence the AVR35RDS or
TV set being controlled, depending
on which device has been selected.
When the AVR35RDS remote is being
programmed to operate another
device, this button is pressed with the
Device Control Selector
button
c
to begin the programming process.
(See page 28 for more information
on programming the remote.)
Volume:
Press these buttons to
raise or lower the system volume.
Test:
Press this button to begin
the sequence used to calibrate the
AVR35RDS’s output levels. (See page
19 for more information on calibrating
the AVR35RDS.)
TV/VCR:
This button does not
function with the AVR35RDS, but it is
available for use with other devices.
13
AVR35RDS 230 volt Rev (C) 9/28/98
