background image

2

AVR

Introduction, Speaker Placement and Connection

Rear-Panel Connection (AVR 3650 shown)

Note: Silkscreening and connectors will vary for different models. 

Not all connectors shown will be present on all models.

Introduction

Thank you for choosing a harman kardon® product!

This quick-start guide contains all the information you need to connect and set up your new harman kardon 
audio/video receiver. 

To conserve our natural resources, your receiver does not include a printed owner's manual. An owner's 
manual containing complete information about operating all of your new receiver’s features is available 
at our Web site. Go to www.harmankardon.com and download the

 AVR 3650, AVR 365, AVR 2650, AVR 265 

Owner’s Manual

.

Place the Receiver

•  Place the receiver on a firm and level surface. Be certain that the surface and any mounting hardware 

can support the receiver’s weight.

•  Provide proper space above and below the receiver for ventilation. If you install the receiver in a 

cabinet or other enclosed area, provide cooling air within the cabinet. Under some circumstances, a 
fan may be required.

•  Do not obstruct the ventilation slots on the top of the receiver or place objects directly over them.

•  Do not place the receiver directly on a carpeted surface.

•  Do not place the receiver in moist or humid locations, in extremely hot or cold locations, in areas near 

heaters or heat registers, or in direct sunlight.

Connections

CAUTION: Before making any connections to the audio/video receiver, ensure that the receiver’s 
AC cord is unplugged from the receiver and the AC outlet. Making connections with the receiver 
plugged in and turned on could damage the speakers.

Place Your Speakers

Determine the locations for your system’s speakers according to their manufacturer’s directions and 
the layout of your listening room. Use the illustrations below as a guide for 7.1-channel and 5.1-channel 
systems.

Speaker Positioning for 

7.1-Channel Systems

Speaker Positioning for 

5.1-Channel Systems

For more detailed speaker placement information, including the use of front height speakers, download 
the complete 

AVR 3650, AVR 365, AVR 2650, AVR 265 Owner’s Manual 

from www.harmankardon.com.

Radio Antenna 

Connectors

HDMI® 

Connectors

Digital Audio 

Connectors

Analog Video 

Connectors

The Bridge IIIP 

Connector

AC Input 

Connector

Main Power 

Switch

Network 

Connector

Speaker 

Connectors

Analog Audio 

Connectors

Subwoofer 

Connector

Summary of Contents for AVR 3650











Reviews: