manualshive.com logo in svg

Harman Kardon AVR 245, Service Manual

Share
Download
Harman Kardon AVR 245 Service Manual Download Page 9

10

6-/8-Channel Inputs:

Connect the analog audio outputs of a DVD-

Audio, SACD

™

, Blu-ray Disc

™

or HD-DVD

™

player (or any other external

decoder) to these jacks to enjoy these proprietary formats.

Component Video Inputs:

If both a video source (e.g., DVD player

or HDTV tuner) and your television or video display have analog compo-
nent video (Y/Pb/Pr) capability, then you may connect the component
video outputs of the source to one of the two component video inputs.
Do not make any other video connections to that source.

Component Video Monitor Outputs:

If you are using either 

of the Component Video Inputs and your television or video display is 
component-video-capable, you may connect these jacks to the corre-
sponding inputs on your video display. You will also need to connect 
the composite and/or S-video monitor outputs to your video display 
to view the AVR 245’s on-screen displays.

RS-232 Serial Port:

This specialized connector may be used with

your personal computer in case Harman Kardon offers a software
upgrade for the receiver at some time in the future.

RS-232 Mode:

Leave this switch popped out in the Operate position

unless the AVR 245 is being upgraded.

RS-232 Reset:

This switch is only used during a software upgrade.

A standard processor reset is performed by pressing and holding the
front-panel Tone button.

Switched AC Accessory Outlet:

You may plug the AC power

cord of one source device into this outlet, and it will turn on whenever
you turn on the receiver. Do not use a source that consumes more than
50 watts of power.

AC Power Cord:

After you have made all other connections, plug the

AC power cord into an unswitched outlet.

HKP1477AVR245om  8/29/06  5:45 PM  Page 10

9

AVR245 

 

 

 

 

 

 

 

 

 

 

 

harman/kardon

  

 

Summary of Contents for AVR 245





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands