Harman Kardon AVR 245 Service Manual Download Page 30

Page: 30 / 228

iPod Function

Remote Control Key

Front-Panel Button

Play

Play (

›

)

Tuner Mode

Pause

Pause (

)

Tuner Mode

Menu (Spkr)

Tuner Band (AM/FM)

Select

Set

Scroll Forward

Left Arrow (

‹

)

Preset Down

Scroll Reverse

Right Arrow (

›

)

Preset Up

Forward Search/Next Track

Forward/Next (

››

)

Tuning Up

Reverse Search/Previous Track Reverse/Previous (

‹‹

) Tuning Down

The

Bridge

HKP1477AVR245om 8/29/06 5:46 PM Page 40

OPERATION

Recording

Two-channel analog and digital audio signals, as well as composite
and S-video signals, are normally available at the appropriate recording
outputs. Thus, to make a recording, you need only make sure to con-
nect your audio or video recorder to the appropriate output jacks, as
described in the Installation section, insert blank media and make sure
the recorder is turned on and recording while the source is playing.

NOTES:

1. Analog audio signals are not converted to digital form, and

digital audio signals are not converted to analog audio form.
However, you may record a coaxial or optical digital audio
source using either type of digital audio output.

2. Only PCM digital audio signals are available for recording.

Proprietary formats such as Dolby Digital and DTS may not
be recorded using the digital audio connections, although if
the source is connected to the AVR using the analog audio
connections, an analog recording may be made.

3. Component video sources are not available for recording.

4. Please make certain that you are aware of any copyright

restrictions on any material you record. Unauthorized duplica-
tion of copyrighted materials is prohibited by federal law.

Using

The Bridge is an optional dock that may be used with a compatible iPod
(not included). When The Bridge is connected to its proprietary input on
the AVR 245 and the iPod is docked, you may play the audio materials
on your iPod through your high-quality audio system, operate the iPod
using the AVR remote or the AVR’s front-panel controls, view navigation
messages on the AVR’s front panel or a connected video display, and
charge the iPod.

Either press the front-panel Source Selector repeatedly until the mes-
sage “DMP/The Bridge is CONNECTED” scrolls across the front panel
and semi-OSD displays, or press the DMP Button on the remote to
select The Bridge as the input source.

Figure 73 – Using The Bridge (Remote)

Figure 74 – Using The Bridge (Front Panel)

Table 5 summarizes the controls available when The Bridge is in use. See
also Figures 73 and 74.

Table 5 – Using The Bridge

NOTE:

For the Search function, press and hold the indicated but-

ton. Pressing the Previous Track Button once skips to the beginning
of the current track. Press the Previous Track Button

twice

to skip

to the beginning of the previous track.

It is possible to activate Repeat (one track or one album/playlist) and
Shuffle (songs or albums) modes using the DMP SETTING menu (see
Figure 56). This menu may also be used to turn on the Resume feature,
which resumes play of the current track from the point it was interrupt-
ed, or to enable charging while the AVR is in Standby mode.

Access the DMP SETTING menu by pressing OSD to display the
MASTER MENU. Press the Set button to display the INPUT SETUP
menu. When DMP/The Bridge is selected as the current source, you
may scroll down to the GO TO DMP SETTING line and press the Set
button to display the DMP SETTING menu. See the Initial Setup section
for more information on using the DMP SETTING menu.

AVR245