Harman Kardon AVR 220 Owner'S Manual Download Page 8

Page: 8 / 52

FRONT PANEL INFORMATION DISPLAY

Front Panel Information Display

Memory Indicator:

This indicator flashes

when entering presets and other information
into the tuner’s memory.

Stereo Indicator:

This indicator lights when

an FM station is being tuned in stereo.

Tuned Indicator:

This indicator lights when a

station is being received with sufficient signal
strength to provide acceptable listening quality.

Auto Indicator:

This indicator lights when

the tuner’s Auto mode is in use.

Main Information Display:

This display

shows messages relating to the status, input
source, surround mode, tuner, volume level or
other aspects of the AVR 220’s operation.

Analog Input Indicator:

This indicator

lights when an analog input source has been
selected.

Coaxial Digital Input Indicators:

These

indicators light to show when a Coaxial Digital
Input has been selected.

Optical Digital Input Indicators:

These

indicators light to show when an Optical Digital
Input has been selected.

Summary of Contents for AVR 220





















































Search results

Summary of Contents for AVR 220

Reviews:

Brands by name

Popular brands

Harman Kardon AVR 220, Owner'S Manual

Search results

Summary of Contents for AVR 220

Reviews:

Brands by name

Popular brands