manualshive.com logo in svg

Harman Kardon AVR 220, Owner'S Manual

Share
Download
Harman Kardon AVR 220 Owner'S Manual Download Page 15

15

INSTALLATION AND CONNECTIONS

Installation and Connections

4. Connect the digital audio outputs of a DVD
player, satellite receiver, cable box or HDTV con-
verter to the appropriate 

Optical 

or 

Coaxial

Digital Inputs 

ef

#$

.

5. Connect the 

Video Monitor Output

¤

jacks on the receiver to the composite or 
S-Video input of your television monitor or
video projector.

Video Connection Note:

• Composite and S-Video signals may only be

viewed in their native formats. S-Video inputs
may only be viewed when the AVR 220 is
connected to a TV set or video display with
S-Video capability.

Power Connections

This unit is equipped with two accessory AC
outlets. They may be used to power accessory
devices, but they should not be used with high-
current draw equipment such as power ampli-
fiers. The total power draw to each outlet may
not exceed 100 watts.

The 

Switched AC Accessory Outlet 

fl

will

receive power only when the unit is on. This is
recommended for devices that have no power
switch or a mechanical power switch that may
be left in the “ON” position.

NOTE:

Many audio and video products go into

a Standby mode when they are used with
switched outlets, and cannot be fully turned on
using the outlet alone without a remote control
command.

The 

Unswitched AC Accessory Outlet 

‡

will receive power as long as the unit is
plugged into a powered AC outlet.

Finally, when all connections are complete, plug
the 

Power Cord 

°

into a nonswitched 120-

volt AC wall outlet. You’re almost ready to enjoy
the AVR 220!

Summary of Contents for AVR 220





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands