Harman Kardon AVR 145, Service Manual

Page: 17 / 151

Video 1 Source
Since this source includes audio and video recording output jacks, it is
best suited to a video recorder, such as your VCR or DVR.
Referring to Table 2, connect your recorder to the Video 1 Analog Audio
inputs and outputs
and to either the Coax 2 or Optical 2 digital audio
input (and corresponding digital audio output). Use either the Video 1
S-video or composite video input and output if you wish to make
recordings. If you don’t plan on recording, you may use the Component
Video 2 inputs.
Figure 18 – Video 1 A/V Inputs and Outputs, and Digital Audio Inputs
Remember to connect the audio and video output jacks on your
recorder to the Video 1 or digital audio input jacks on the AVR, and the
audio and video
input jacks on your recorder to the Video 1 or digital
audio
output jacks on the AVR.
Device Type AVR 145 Source Input Audio Connections Video Connections
VCR, DVR, PVR, Video 1 • Video 1 Analog (inputs and outputs) • One of component Video 2, Video 1 S-video
TiVo or other and or Video 1 composite video
audio/video recorder • Either Coax 2 or Optical 2, with • For recording, use Video 1 S-video or
corresponding coax or optical digital composite video output, and do not use
output component video connections at all
Cable TV, Satellite, Video 2 • Video 2 Analog and • One of component Video 2, Video 2
HDTV or other • Optical 1 S-video, Video 2 composite video
device that delivers
television programs
TV, game console, Video 3 (front-panel jacks) • Video 3 Analog and •
One
of component Video 2, Video 3 S-video
camera or other • Either Coax 3 or Optical 3 or Video 3 composite video
audio/video device
DVD Audio/Video, DVD • DVD Analog • Component Video 1
SACD HD-DVD, • 6-Channel inputs (optional) and
Blu-ray Disc • Coax 1
CD player CD • CD Analog and • Not required
• Either Coax 2 or Optical 2
CDR, MiniDisc, Tape • Tape Analog (inputs and outputs) and • Not required
cassette • Either Coax 2 or Optical 2
• Use corresponding coax or
optical digital output
20
INSTALLATION
NOTE : It’s possible for a source to use none of the connections
named for that source. For example, you might connect your
DVD player to the Component Video 1 inputs and the Coax 1
digital audio input. However, we will refer to this source as
“DVD”, and in Step Five of the Initial Setup section you will pro-
gram the receiver so that these connections are assigned to the
DVD source. When you select “DVD” as your source using the
front panel or the remote, the correct connections for your DVD
player will be used.
We recommend connecting your various sources using the connections
shown in Table 2 below in order to simplify programming your receiver
and remote control. However, you may connect any device to any
source input.
Table 2 – Recommended Source Component Connections
AVR 145 OM (New) 8/4/06 1:19 PM Page 20
17
AVR145
harman/kardon