28
Maintenance - Cleaning Glass on View Door
The glass used in your stove is manufactured to exact standards to withstand the high heat of the fire, but
like all glass, it must be treated with common sense and care. Never abuse the glass by slamming the door
shut or striking the glass with a heavy object. If the glass is broken or damaged, do not operate the stove until
it has been replaced.
glass - replacement
If the stove’s glass is cracked or broken, you must replace it before operating your stove. Remove pieces
carefully. Replace glass only with Harman replacement glass;
do not use substitutes.
Carefully remove damaged glass, gasket material, and hold down clips (set aside).
Install the self adhesive 1/4"” gasket material around the front face of the glass. Set the glass panel and gasket
gently onto the door. Install the hold down clips and tighten with bolts.
glass - Cleaning
Sometimes it will be necessary to clean accumulated ash from the glass surface; allowing this ash to remain
on the glass for long periods can result in “etching” due to the acidity of the ash. Never clean the glass while it
is hot, and
do not
use abrasive substances. Wash the surface with cool water, and rinse thoroughly. You may
wish to use a non-abrasive cleaner specifically designed for use on stove glass. In any case, dry thoroughly
before relighting your stove.
Disposal of ashes
: Ashes should be placed in a metal container with a tight fitting lid. The closed container of
ashes should be placed on a non-combustible floor or on the ground, well away from all combustible materials,
pending final disposal. If the ashes are disposed of by burial in soil or otherwise locally dispersed, they should
be retained in the closed container until all cinders have thoroughly cooled.
Soot and fly ash:
Formation and need for removal. The products of combustion contain small particles of
fly ash. The fly ash will collect in the exhaust venting system and will restrict the flow of the flue gases. Pellet
fuels have different ash contents
depending on what type of wood has been used to make the pellets. We
recommend to clean the system after approximately 1 ton of pellets have been burned and judge from
that how often the stove should be cleaned, remember if you change pellets it may change how often
you have to clean your stove.
When burning wood slowly, the potential exists for creosote to form. The venting system should be
inspected periodically throughout the heating season to determine if a creosote buildup has occurred. If a
significant layer of creosote has accumulated (3mm or more), it should be removed to reduce the risk of
a chimney fire. If a fire occurs, call the fire department, shut down the stove, and evacuate the residence.
Before using the appliance, have the venting system thoroughly inspected and replace any damaged
components.
Glass Gasket
Replace glass
only with high
t e m p e r a t u r e
ceramic glass.
Inspect door gasket during
cleaning and inspection
Fig. 57
Summary of Contents for Harman Accentra Insert
Page 36: ......
Page 37: ......
Page 44: ...44 Service Maintenance Log Date Of Service Performed By Description Of Service...
Page 47: ......
