Harley Benton Powerplant, Owner'S Manual

Page: 12 / 16

12
The control elements
q
9V /500mA output
w
POWER - operating indicator
e
12V /250mA output
r
12V
~
/250mA output
t
POWER ON/OFF - on/off switch
y
MAINS VOLTAGE - power cord socket
u
Fuse holder
Power connection
1. Connect the power cord provided to the MAINS VOLTAGE
socket of the unit.
2. Plug the power cord into a properly wired and earthed electrical
wall socket with a mains voltage of 230 V~ / 50 Hz.
To switch on/off
1. Switch the POWER switch (
t
) into ON (I) position, to turn the
device on. The operating indicator (
w
) will light up in blue.
2. To turn the device off, switch the POWER switch (
t
) into OFF
(O) position. The operating indicator (
w
) will go out after few
seconds.