7
40 Rewind ™ Radial Winch
Installation and Maintenance Manual
Procedure 2
To install, you must remove the winch skirt and use hexagonal headed (HH) bolts.
Tools needed
A number 3 hex key
One medium fl at-bladed screwdriver
To identify the various parts, refer to the exploded view at the end of this Manual.
1. Unscrew the screw n°26 and slide off
the knob n°24 (0,5 Nm/ 4,42 in-lb)
2. Remove the skirt n°2 with the help of
the screwdriver placed as shown by the
symbol
5. Remove the stripper arm n°21 by
rotating and lifting it.
6. Lift off the drum n°38
