Access Rail System – R27
5
It is the responsibility of the user and the purchaser of this equipment to assure that they are familiar with these
instructions, trained in the correct care and use of, and are aware of the operating characteristics, application
limits, and the consequences of improper use of this equipment.
PERSOnAL FALL ARREST EquIPMEnT
When using a hook with positive locking mechanism to connect to car shackle, ensure roll-out cannot occur.
Roll-out occurs when interference between hook and mating connector causes hook gate to unintentionally open
and release.
Self-locking snap hooks and carabiners should be used to reduce possibility of roll-out. Do not use hooks or
connectors that will not completely close over attachment object.
Follow manufacturer’s manual for correct use of energy-absorbing lanyard.
Follow manufacturer’s instruction manual for correct use of bosun’s chair and certified safety harness.
Do not attach a connector such that it will impact on the side of the car when in use.
WARNING! This product is part of a personal fall arrest system. The user must follow the manufacturer’s
instructions for each component of the system. These instructions must be provided to the user of this
equipment. The user must read and understand these instructions before using this equipment. Manufactur-
er’s instructions must be followed for proper use and maintenance of this equipment. Alterations or misuse
of this equipment, or failure to follow these instructions, may result in a fall or failure to arrest a fall leading
to serious injury or death.
4) use
5) Training
6) Inspection
INSPECT BEFORE EACH USE
A formal inspection of the rail and its connection to the structure must be
performed at least annually by a competent person other than the user.
The inspection should be recorded in an inspection and maintenance log.
BEFORE EACH USE
A) Inspect pinstop for spring degradation, cracks or wear that may affect locking
strength and operation. Check drive pin holding plastic latch to post to make sure
it is secure.
WARNING! If pinstop locking mechanism fails cars may become loose
on rail resulting in an uncontrolled slide along rail resulting severe
injury and death.
A
Drive Pin
C
E
B
A
D
B
B
B
C
After a Fall:
Any equipment which has been subjected to the forces of arresting a fall must be removed from
service immediately and destroyed by user or an authorised person.
Rescue:
when using this equipment, the employer must have a rescue plan and the means at hand to implement it
and communicate that plan to users, authorised persons, and rescuers.
