background image

10 

Access Rail System – R27 

8) Labeling

EquIPMEnT RECORD

Product:

Model/Type

Description

Serial Number

Manufacturer

HARkEN

Address 

N15W24983 Bluemound Rd 

Pewaukee, WI 53072-4974USA

Tel/Fax/Email/Website

(262) 691-3320 / (262) 701-5780 

[email protected] / www.harken.com

year of Manufacture

Purchase Date

Date First Put Into Use

Other important information (i.e. document number):

A record must be kept for each component, subsystem and system, with the following details (see example record log 

below).

It is the responsibility of the user organisation to provide the record and to enter onto the record the details required.

EXAMInATIOn/REPAIR HISTORY

Date

Reason for Entry 

(Periodic exam or repair)

Defect notes, repairs carried out and 

other important  information

Name and signature of  

compentent person

Date of next periodic 

examination

9) Records 

The following is an example and explanation of the product labelling:

1. Product part number; 2. Serial number; 3. Manufacturer’s name; 4. Product name; 5. Number of document to which 

the equipment conforms; 6. CE symbol; 7. Pictogram indicating the necessity for users to read the instructions for use 

and label part number.

HC9608

A0000

www.harkenindustrial.com

Access Rail System R27 EN 795:2012

0321

4686

1

2

3

4

5

6

7

Loctite

®

 is a registered trademark of Henkel AG & Company KGaA 

McLube

 is a registered trademark of McGee Industries, Inc. 

Torlon

®

 is a registered trademark of Solvay Advanced Polymers.

Summary of Contents for R27





















Reviews: