7
STEP 4 FITTING CABINET CASTORS
STEP 3 FITTING CABINET BASE TO LEFT HAND AND RIGHT HAND END
PANEL
Parts Required
AE 2pcs Locking castors
AF 2pcs castors
Parts Required
F
Base panel
— Screw locking castors into bottom of left hand legs.
— Screw castors into bottom of right hand legs.
— 8pcs screws are pre-assembled and they should be
screwed out 2-3mm for assembly.
— Once legs are located onto screws, tighten the screws.
This is done through the hole on the legs as per figure 3.
— Please note the hole in the base panel should be
closest to the right hand end panel.
Figure 3
Figure 4
LEFT HAND END PANEL (E)
BASE PANEL (F)
RIGHT HAND END PANEL (D)
HOLE
SCREW LOCKING CASTORS
(AE) IN TO BOTTOM OF
LEFT HAND END LEGS.
SCREW CASTORS (AF)
IN TO RIGHT HAND
END LEGS
.
