24
Manual Ignition
The Metal Chain with match holder is located under the side burner table, which is used for
manual ignition.
1. Open the gas control valve at the cylinder.
2. Insert match in to the match holder, light the match and place next to the burner as shown in
Figure 35.
3. Push and turn the control knob anti-clockwise to the High position.
4. If burner still fails to light after 5 seconds, turn to OFF position and wait 2 minutes. Then begin
again from step 2. If the burner still fails to light after several attempts, call the Customer
Service Helpline 1300 799 787.
WARNING: IF THE BURNER FAILS TO IGNITE, TURN THE CONTROL KNOB OFF
(CLOCKWISE) AND ALSO TURN THE CYLINDER VALVE OFF BEFORE
ATTEMPTING TO RELIGHT WITH IGNITION SEQUENCE.
MATCH HOLDER
BURNER
Figure 34
CONTROL KNOB - SIDE BURNER (X)
LIT MATCH
