HI 6020IT-SSX-Y-EX and HI 6020JB-SSX-Y-EX User Guide
Page | 4
Chapter 1
Overview
• • • • • •
Please read and observe these instructions carefully before installing or using the HI 6020 Junction Box. In
addition, please store these instructions in a secure, dry location for future reference. If lost, these instructions
can be downloaded from the Hardy website at
This user guide describes installation, setup and operating procedures for the HI 6020IT and HI 6020JB
summing boxes. Be sure to read and understand all cautions, warnings, and safety procedures in this user guide
to ensure safe installation and operation of the summing boxes.
Hardy Process Solutions sincerely appreciates your business. We encourage input about the performance and
operation of our products from our customers. Should you not understand any information in this user guide or
experience any problems with this product, please contact our Technical Support Department at:
Phone:
(858) 278-2900
Toll Free:
1-800-821-5831
FAX:
(858) 278-6700
E-Mail:
[email protected] or [email protected]
Website:
Please visit our website for the latest revision of this User Guide and sign up for the Hardy Newsletter to get
the latest information on all Hardy products and services. For answers to technical issues and service problems,
please visit the Hardy WebTech section of our website or contact a technician by phone during our normal
operating hours (6:30 AM to 5:30 PM Pacific Time).
Introduction to the HI 6020IT and HI 6020JB Summing Boxes
The Hardy HI 6020 summing box is a critical component in a weighing system that enables use of Hardy’s core
technologies - C2
®
electronic calibration and Integrated Technician
®
(IT).
Each summing box distributes excitation voltage to up to four load cells and transfers each load cell’s
performance characteristics and weight signals to the Hardy weighing instrument. A summing card with IT
allows a weighing instrument operator to switch to the summing card’s internal test circuit and diagnose the
entire weighing system from the front panel of the instrument or a remote location over the Internet. Individual
load cells can be isolated from each other for weight and voltage readings, allowing a technician or operator to
quickly and safely troubleshoot weighing system faults and anomalies.
The HI 6020 Summing box is available with a variety of options, including Integrated Technician
®
(IT) and
trim pots (for non-Hardy load cells). The UL Type 4/4X stainless steel enclosure features a thick-wall design
with an interior seal for a long lasting, robust wash-down installation. Two configurations are available, a 5-
hole version for connecting up to four load cells to a Hardy weight indicator, controller, or module; or a 6-
hole version that connects to a second HI 6020 summing box to enable up to eight load cells to be connected
to a Hardy weight indicator or controller.