Hardy HI 6020IT-SS Series User Manual Download Page 13 | Manualshive

Page: 13 / 15

Hardy HI 6020IT-SS Series User Manual Download Page 13

HI 6020IT-SSX-Y-EX and HI 6020JB-SSX-Y-EX User Guide

Page | 13

Chapter 4

List of Applicable Standards

• • • • • •

The HI 6020 Junction Box complies with the European Council Directives as well as international regulations
and standards for electrical equipment, electromagnetic compatibility, and the stipulated safety requirements.
The HI 6020 Junction Box meets the requirements set in EC Directive 2014/34/EU for electrical equipment in
category II 1 G and as such is suitable for use in potentially explosive Zone 0 atmospheres.
Any other use beyond this is considered improper.

HI 6020JB-SSX-Y-EX and HI 6020IT-SSX-Y-EX junction boxes have been evaluated to, and conform to the
requirements of the following standards.

•

IEC 60079-0 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT GENERAL
REQUIREMENTS - Edition 6 - Revision Date 2014/10/01

•

IEC 60079-11 EXPLOSIVE ATMOSPHERES

– PART 11: EQUIPMENT PROTECTION BY

INTRINSIC SAFETY “I” - Edition 6 - Revision Date 2014/10/01

•

EN 60079-0 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL
REQUIREMENTS - Edition N/A - Revision Date 2013/01/01

•

EN 60079-11 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY
INTRINSIC SAFETY "I" - Edition N/A - Issue Date 2012/01/01

«
...
11
12
13
14
15
»

Summary of Contents for HI 6020IT-SS Series
















Reviews:

No comments